904-068
April 1, 2005

Sanding my fingers to the bones. When you stick-sand, it takes all 10 to hold that paint stick steady. After the urethane primer is applied, stick-sanding is the next step before final primer. This gets every last lump flat. Notice the black lacquer guide coat...this enables us to see the high spots versus the low spots and especially the pin holes.

The two dark spots in the photo on the left are two high spots where I sanded right through to the duratec. The stick shows no mercy for high spots.

Final primer has been applied. Next step...silver!

<< Previous Update | Next Update >>