906-130
January 28, 2011
We've waited 4 years for these shock absorbers! Here, Andy has laid out the tops of the shocks with bearings, before installation.
We lost Joe Stamola through this whole shock ordeal. Koni couldn't produce the parts and so on and so on and so on.... I thank Joe's son for getting the job done. Better late than never.
Andy is getting ready to assemble the shocks using factory progressive springs.
Bingo! Worth the wait.
At least I hope the owner thinks it was worth the wait.
Andy measures the overall length, making sure the spacing in the spacers and springs is the same from side to side.
Fronts are installed.
Rears are installed.... Sweet!
<<Previous / Next>>